Verdant Grow Diary logo

    Still Air Box vs Flow Hood: Which Clean Workspace Fits Your Tissue Culture Work?

    Tissue culture and other sterile work fail when airborne spores and bacteria land on open medium. A still air box and a flow hood both reduce that risk in different ways. Neither replaces careful technique.

    Quick answer

    A still air box is a closed, clear box with arm holes. It works by keeping the air still, so fewer particles move onto your work. A laminar flow hood blows filtered air across your work surface. A still air box is simpler and suits low volume. A flow hood suits more transfers and longer sessions. Both depend on cleaning and technique.

    Keep this record in Verdant →

    Free to start. Record which workspace each transfer used and how it turned out, so you can compare.

    How a still air box works

    A still air box is usually a clear plastic tote turned upside down, with two arm holes. You clean the inside, let the air settle, then work slowly inside it. It does not filter air. It reduces the movement that carries particles onto open containers.

    Its limits come from that design. Fast arm movements stir the air, space is tight, and long sessions are awkward. How much contamination a still air box prevents has not been well measured, so judge it by your own results.

    How a laminar flow hood works

    A laminar flow hood pushes air through a high-efficiency filter and across the work surface, so clean air flows past your open containers. It gives you room to work and suits more transfers per session.

    A hood is only as good as its filter and how it is used. Filters need maintenance, and anything upstream of your work (your hands, an open bag) can still put contamination in the airflow. A 2024 study in the Australian Journal of Crop Science ran flow hoods as room air filters. With the medium also chemically sterilized, it found no fungal or bacterial contamination in that setup. That result came from a specific lab method, not a home setup.

    How to choose

    Choose by how much clean work you do and how your results look, not by what others use.

    • Low volume or just starting: a still air box is a reasonable place to learn technique.
    • Frequent transfers or long sessions: a flow hood is easier to work in.
    • Contamination rising in either one: check technique, cleaning and medium handling before buying equipment.

    Record results so you can compare

    Log which workspace each transfer used, what you cleaned, and whether each vessel stayed clean. After a few rounds, you can compare contamination between your own still air box and flow hood work.

    Cannabis tissue culture guide

    Keep the record in Verdant

    Notes in a phone or on paper get lost between runs. Verdant keeps them on each plant's timeline, next to your photos, feeds and sensor readings.

    Keep this record in Verdant →

    Free to start. Record which workspace each transfer used and how it turned out, so you can compare.

    FAQ

    Is a still air box as good as a flow hood?

    They work differently. A still air box keeps air still. A flow hood blows filtered air across your work. How much a still air box prevents contamination has not been well measured, so compare by logging your own results.

    Can I do cannabis tissue culture in a still air box?

    Many home growers start that way. Work slowly, clean thoroughly, and keep sessions short. Record which transfers were done in the box so you can see whether contamination is a problem.

    Does a flow hood make my work sterile?

    No. It supplies filtered air, but technique still matters. Your hands, tools and anything placed upstream of your work can still introduce contamination, and the filter needs maintenance.

    Keep reading